ZT7000 FX1000V KAW 72SD
Commercial zero-turn mower
72 inch side discharge configuration
Kawasaki FX1000V engine
AirFX Cutting System deck
HG ZT-5400 two-speed transaxles
15.0 gal fuel capacity
Extra-high back mechanical suspension seat
3-year or 2,000-hour limited warranty
$32,340.00
Commercial Zero-Turn Mower
The Bobcat Zero-Turn ZT7000 72SD is a commercial zero-turn mower for large properties and serious mowing work. It suits operators covering wide grass areas, especially sites where a 72-inch mower deck makes sense.Engine and Cutting Deck
This model runs a Kawasaki FX1000V engine with 35.0 hp and 999 cc displacement. In addition, the 72-inch AirFX Cutting System deck includes an adjustable front lip. Also, seven anti-scalp rollers support the cutting deck across rougher ground. As a result, operators can set the cutting height from 1.0 to 5.5 inches.Transmission and Operating Speed
The Bobcat Zero-Turn ZT7000 72SD uses HG ZT-5400 two-speed hydrostatic transaxles. For transport, forward speed reaches 19.0 mph. For cutting, forward speed reaches 13.0 mph. Meanwhile, reverse speed reaches 7.5 mph for transport and 5.0 mph for cutting. Buyers can compare travel speed, mowing speed, and site suitability.Frame and Wheels
For construction, Bobcat lists 1.5 by 2.5 inch steel tubing and a welded reinforced steel frame. Machine length measures 87.0 inches, and wet machine weight is 1541 lb. In addition, drive wheels measure 26 by 12-12. Front caster wheels measure 15 by 6.5-6 and use a no-flat design.Operator Setup
The operator setup also carries clear, work-focused specifications. The machine includes an extra-high back full mechanical suspension seat with fore-aft adjustment. Fuel capacity is 15.0 gal, and the charging system is listed at 15 amp. Additionally, the flexible molded polymer discharge chute sits on the discharge side. Blade tip speed is listed at 18,152 fpm at 3550 engine rpm.Model Identification
The Bobcat Zero-Turn ZT7000 72SD suits buyers comparing Bobcat mowers for commercial mowing, acreage mowing, and large mowing sites. The 72SD configuration refers to the verified 72-inch side discharge model. Before ordering, confirm the model number, engine, and deck size. This page covers the Bobcat ZT7000 72SD with the Kawasaki FX1000V engine. Finally, Bobcat lists a 3-year or 2,000-hour limited warranty for this ZT7000 specification sheet.Frequently Asked Questions
This configuration uses a Kaw FX1000V engine with 35.0 hp and 999 cc displacement.
It has a 72.0-inch AirFX Cutting System deck with an adjustable front lip.
The cutting height range is 1.0 to 5.5 inches, or 25 to 139 mm.
This model uses HG ZT-5400 two-speed hydrostatic transaxles.
The listed fuel capacity is 15.0 gal, or 56.7 L.
It includes an extra-high back full mechanical suspension seat with fore-aft adjustment.
Bobcat lists a 3-year or 2,000-hour limited warranty for the ZT7000 specification sheet.
Come Visit Us At
Morleys Machinery
25 Church St, Traralgon VIC 3844
Let’s Talk Outdoor Power Equipment
Have a question or need a quote? Our team is here to help with expert advice, fast turnaround times and service you can count on, whether you’re after new equipment or booking a repair.